CGDI BMW V2.6.0 upgrading content
CG-DI Software update V2.6.0 version
 

               -----------------------------------------------------------------------------------------------------------------------------
    CG-DI V2.6.0   NEW http://www.cgprogcar.com/en/?c=msg&id=456

    (2019.03.05)

1. Added: EWS1-3 key matching function.

2. The E-code is modified to modify the VO code function, and the VO code can be added or deleted directly by the selection method, and the operation is simpler.

3. The BMW data modification adds support for both N13 and N55 engine data.

---------------------------------------------------------------------------------------------------

CG-DI V2.5.0  

(2019.01.10)

1. Added BMW E series programming, support single module programming of E60, E65, E70, E89, R56 and other chassis models (multimedia module requires fiber optic communication, temporarily not supported).

2. Added BMW E series code, support E60, E65, E70, E89, R56 and other chassis models single module code, backup code and recovery code.

3. FEM/BDC key matching: Add 0000155E.018_120_010, 00002419.081_010_020 two versions of FEM/BDC with key.

4. F/G system programming: increase the support of swfk, flup, blup programming files, and fix some programming failures.

5. CAS1-CAS3+ key matching: increase the Rolls-Royce CAS1, CAS2 key matching.

6. BMW data modification: Add CAS3+, CAS4+ ISN encryption and decryption functions.

7. Maserati Mileage Adjustment: Added the function of saving EEPROM data.

8. BMW F-series codding:Fix List display incomplete.

------------------------------------------------------------------------------------------------------------------------

CG-DI V2.4.0  

(2018.12.13)

1. New: BMW data modification function: support CAS3/3+ data modification VIN, ISN, support CAS4/4+ data VIN, ISN modification, support N20 data VIN, ISN modification.

2. BMW F/G series programming: support automatic code setting after programming; repair some problems of instrument programming failure; repair some EPS programming failure problems; repair ECU list display error.

3. CAS mileage reset: fix the problem of partial version programming failure.

4. Firmware upgrade: Improve USB communication performance.
  --------------------------------------------------------------------------------------------------------------------------------   

CG-DI V2.3.0
(2018.11.21)

1. New: Porsche 987, 911 OBD key learning

2. New: Maserati Levante 95320, Geberit 95160, President 95160 Instrument OBD adjustment

3. FEM/BDC key matching: Optimize the pre-processing process, increase backup FAFP, restore FAFP function, calculate       ECU data, reset starter lock, calculate ELV data function, and add repair remote control function description.

4. BMW F Series Programming: Supports instrument programming greater than 10MB. The modules to be programmed       are displayed in red font, and the code modules are displayed in blue font.

5. BMW F system code: Optimize the modules to be programmed in red font.

6. 95128/95256 adds 95540 chip read and write.
        --------------------------------------------------------------------------------------------------------------------------------   

     (2018.011.06)
           Please click this link to download version v2.2.5 http://www.cgprogcar.com/en/?c=list&cs=xiazaizhongxin          

       1. Fix some win7 users fail to open the software.

       2. Fix a problem that a version has failed to erase the mileage.

       3. OBD key matching: increase support for 9389115, 9395657 two versions of CAS3++

       4. BMW ISN: Add 9389115, 9389116, 9395656, 9395657 four versions of CAS read, write, read and write ISN

       5. Increase CAS mileage reset function, support CAS1-CAS3+, a small number of versions of CAS are not supported, if you do
       not support you can try to upgrade to a supported version.
      
The following are the supported CAS hardware numbers:

      CAS3:6943770,6943774,6943776,6943777,6943779,6943780,6943783,6943784,6943788,6943790,6943798,6943805,6943806,
      6943816,6943817,6943823,6943824,6943832,6965769,6985696,6985697,9147170,9147171,9147184,9147193,9147194,9147197,
             9147198,9147199,9147200,9147201,9147202,9147207,9147208,9147209,9147210,9147211,9147218,9147219,9147228,
      9147229,9230591,9257219,9257220,9273192,9273193,9283153,9283154,9314256,9321069

      CAS2:4113748,4113918,4113919,4114222,4114373,4116023,4116658,4117916,4119466,4121910,4125233

      4125709,4142256,6922390,6927930,6931395,6943745,6960978,6961659

      CAS2:4113748,4113918,4113919,4114222,4114373,4116023,4116658,4117916,4119466,4121910,4125233

      4125709,4142256,6922390,6927930,6931395,6943745,6960978,6961659


--------------------------------------------------------------------------------------------------------------------------------
     (2018.08.03)

      1.Fix the problem that the codding ICM module is invalid

--------------------------------------------------------------------------------------------------------------------------------

 (2018.07.19)

1.BMW ISN:Add DME wiring diagrams for D62M57A0, ME9N62_2, MEV9N46, MEV17_2N, MEVD176K, MEVD1724, MEVD1725,
       MS450DS0, MV1722, MVD1722

2.FEM/BDC key matching:Add "write EEPROM" function,Optimize read and write processes

3.Fix CAS4 key matching to determine the CAS type is incorrect。

------------------------------------------------------------------------------------------------------------------------------------------

http://www.cg100procar.com/cgdi-bmw-auto-key-programmer_p0013.html

------------------------------------------------------------------------------------------------------------------------------------------

Message Us