YES----- Authorized to open the function
No ----- has not Authorized the function

CGDI Prog BMW MSV80 Advantages:
1.High technical tool which mainly doing Auto diagnose, programming and security maintenance
2.Support CAS4/CAS4+ All Key Lost
3.Support BMW Key Programmer with OBD Functions
4.Newly Add BMW FEM/EDC Function

CGDI Prog BMW MSV80 BMW CGDI Prog Car Key Programmer

Top 9 Reasons To Get CGDI Prog BMW MSV80:

1.High technical tool which mainly support Auto diagnose, programming and security maintenance 3 in 1.
2.Support Key Programming for BMW CAS1/CAS2/CAS3, and Support Key Matching and All key lost for CAS4 /CAS 4+;
3. Support BMW Key Programming with OBD Functions
4. Software response fast, short time programming, and new breakthrough in operation safety and technical support.
5. Supported Languages: English, Chinese
6. Certification: CCC,CE,GS, CCC,CE,GS,ISO
7. Warranty:1 year
8. Free Update Online on official website http://www.cgprogcar.com/?langid=en, when you receive the device, please download software on official website too.
9. Newly Add BMW FEM/EDC Function for free

CGDI MSV80 forBMW Car Key Programmer Support Module list:

1.forBMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.
2.forBMW CAS4/CAS4+/Support key matching,support key all lost matching.
3.Support forBMW key inspection,can check key what status in.
4.Support forBMW engine computer DME replacement.
5.Support forBMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key)
Exciusively support in Domestic
6.Support forBMW Key unlock.

CGDI MSV80 forBMW Car Key Programmer CGDI Functions:

1.Update in real time,products updated in zero cycle time,support model added in real time.
2.forBMW CAS3/CAS3+Data repair--support change replace and split CAS computer,BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer,ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack,anti-software copy.

CGDI Prog BMW MSV80 Supported Languages: Chinese, English
CGDI Prog BMW MSV80 Main Function:

CGDI is high technical products which mainly doing Auto diagnose,programming,security maintenance.
Features:software response fast,short time programming ,its has new breakthrough in operation safety and technical support.

CGDI Prog forBMW MSV80 Support Model list:

Model	Has key to match key	Without key to match	Read ISN code	Replace engine computer DME	forBMW Key unkock	Working time
CAS1	support	support			support	1 minute
CAS2	support	support	support		support	1 minute
CAS3	support	support	support		support	1 minute
CAS3+	support	support	support		support	1 minute
CAS4	support	support	support			30 seconds
CAS+	support	support	support			3

Read MSV80 specification
Method 1:can read directly ISN code in the car,pls be assure car voltage is 12V above,directly connect OBD to operate--time about 5 minus.
Methods 2:can directly split engine computer (DME) to operate--connect line as follows:
MSV80/D80/D85/wiring in the experimental bench

How to Use CGDI BMW Programmer?

Here take programming FEM Smart Key for BMW F31 as example,and for the details with pics,click here.

Run CGDI PROG BMW software after finish all connection
Go to FEM/BDC key match
The current FEM BDC needs update the ECU program before performing key matching. Please ensure that the car battery has enough power. The programming process, please keep the equipment cable connection
Please remove the FEM BDC and then use the programmer to read and save data from the 95XXX EEPROM chip on FEM BDC computer board
Read the original car EEPROM data file
The 95128 EEPROM chip
Wait for CGDI BMW reading chip data
Save data
Use the programmer to write the calculated new data to the 95XXX EEPROM chip , then put the FEM BDC back into the car
Write M95128
Check the FEM connection
Voltage test platform is on
Use the programmer to write the calculated new data to the 95XXX EEPROM chip , then put the FEM BDC back into the car
The ECU is being programmed…
Again, write M95128
Again, write M95128
Voltage test platform should be on
Please remove the FEM BDC and then use the CGDI programmer to write the original car EEPROM data back to 95XXX EEPROM chip and FEM BDC back into the car
Coding is successful!!!!
CGDI Prog BMW Customers Feedbacks:

cas4 F10 – ok (new key)
cas4+ F10 – ok (new key) isn from org key or dump DME
fem/bdc F31 – ok – reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
CGDI PROG bmw f20 2014 mileage reset OK
Read ISN DME MSD80 OK 5WK93628
program bdc key via obd for bmw x6 ok!
add key to bmw x5 successfully
program key to 2016 BMW 5-series ok
program key for BMW 523Li OK
Program BMW FEM all key lost done!
program FEM for F30 328 2013 ok
programing orignal key for BMW 325 ok
add new key to BMW 3 series ok.
program bmw m3 key done!
Cas 2 - E60 2005 lost key - Obd - not working ( no option to program from dump)
Cas 3+ E87 2008 spare key - eeprom dump - ok
F10 - key from dump - OK
F10 LCI - key from dump and isn from working key - OK
F10 LCI - key from dump and isn from DDE - OK
E60 LCI - downgrade CAS3+ and key via OBD - OK
CGDI BMW Prog Reviews:

I just got the CGDI for BMW based on reading good reviews for their Mercedes tool. Have not seen much info for the BMW tool so I thought Id give a quick run down from my experience so far with the tool.

For making keys it has worked great. I have made about 7 keys so far all CAS types except CAS4.

I tried to read ISN on 3 cars and failed. I think it may only read ISN from MSV80/85 ecu's. Will try on the MSV80 soon and will update. All done by OBD.

I have BMWExplorer and have used Autohex as well, but if you only need to program keys and your not concerned with ISN for DME swaps, I would buy the CGDI before those tools.

Its supposed to do ISN but the advertising wording can be misleading. It may only be able to read ISN of 2 types of DME. So far thats how its looking. Will contact my vendor to verify and see if there is an update preventing ISN reads.

For the money its worth it just to be able to program the CAS3 keys. It works super fast literally less than 2 minutes beginning to end. Faster than BMWExplorer for sure. I have yet to successfully do FEM key with Explorer so as far as Im concerned it has the same key programming capability as the CGDI.
CGDI BMW FAQs:

Question: on tool info it says supports bmw key unlock, does that mean I can reuse a old key and reprogram it?Also how safe if downgrading for cas3+? I only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Answer: Yes, CGDI BMW Key tool supports bmw key unlock, you can reuse an old key and reprogram it.
and yes it is safe if downgrade for CAS3+. Don’t worry you will mess things up.

CGDI Prog BMW MSV80Package includes:

1pc x CGDI Prog BMW MSV80 Main unit
1pc x Adapter
1pc x USB line